Waterfurnace - "Smart Grid"

Discussion in 'General Discussions' started by Graham C, Dec 31, 2015.

  1. Graham C

    Graham C New Member


    I'm looking at using the Smart Grid contacts on my Series 7 to reduce the power usage of my units during a power outage when we are on generator. I see two options under the Smart Grid Config

    "Unoccupied Setpoints"
    "Load Shedding"

    Can anyone provide any background on these? I see nothing useful in the data provided from WF (pdfs).

    Also - it sounds like this will disable/reduce the use of the compressor and disable the electric heat. Will this allow my backup oil system to kick in?

    Thanks - I appreciate the help.

    Last edited: Dec 31, 2015

Share This Page