Temperature offsets for WF Zone Thermostat

Discussion in 'General Discussions' started by rsinglet, Aug 12, 2018.

  1. rsinglet

    rsinglet New Member

    I have a WF Series 7 system with zoning using the Intellizone2 Masterstat controlling zone 1 and two other Zone Thermostats controlling zones 2 & 3. The temperature that was displayed on the master stat was too high by a couple of degrees and was easily corrected by adjusting the offset in the config menus.

    Does anyone know if the offset change to the Master Thermostat will also affect the temperature readings on the Zone Thermostats or is that is something that needs to be adjusted on the individual Zone Thermostats separately? I haven’t been able to find any documentation on the Zone Thermostats that would indicate this is an option.

  2. geoxne

    geoxne Active Member Forum Leader

    I believe the only zone thermostat (besides the MasterStat) available for the Intellizone2 system that has the ability to change temperature offsets is the color touchscreen TPCC32U01

Share This Page