Second time with WaterFurnace

Discussion in 'Geothermal Heat Pump Testimonials' started by supercoldbob, Apr 30, 2014.

  1. supercoldbob

    supercoldbob New Member

    Hi all; So after 20 years with a WF Premier 2 and almost Zero maintenance, I replaced it last week with a WF Series 5. After 5 days I woke up with no heat and COMM error ABC on the Thermo. Turns out the thermo wires didn't get totally snapped onto the mother board, no problem. What is really cool is the service man hooked up the Aurora AID tool and was able to read the in and out temps on the closed loops, also the in and out temps on the air flow along with amp's from the compressor and etc. This is so cool, how come WaterFurnace is not allowing this to connect to my Wi-Fi network or even the thermostat so I can monitor the functions of the unit? Guess I'll have to get the AID tool for myself!
  2. Mark Custis

    Mark Custis Not soon. Industry Professional Forum Leader

    I am sure they would sell you one.
  3. docjenser

    docjenser Well-Known Member Industry Professional Forum Leader

    You can get the aid tool, or wait a few month, then the readout will be web based. You already should have the hardware in it.

Share This Page