How to test DX copper piping prior to putting into ground

Discussion in 'Geothermal Loops' started by Advancedgeothermal, Jan 13, 2011.

  1. Advancedgeothermal

    Advancedgeothermal New Member

    Hi have had all kinds of advice re testing loops. What is the best way to test 3/8 and 1/2 inch loops and where does one get the guage or do you just make one?
     
  2. urthbuoy

    urthbuoy Well-Known Member Industry Professional Forum Leader

    3/8 and 1/2"? DX?
     
  3. Advancedgeothermal

    Advancedgeothermal New Member

    yes 3/8 and 1/2 inch OD ref type K copper tubing for DX
     
    Last edited by a moderator: Jan 13, 2011
  4. Forum Admin

    Forum Admin Administrator Staff Member Forum Leader

    adjusted title for clarification
     
  5. AMI Contracting

    AMI Contracting A nice Van Morrison song Industry Professional Forum Leader

    As far as I know manufacturers send loops under pressure. Once field is assembled one would put a gauge and schrader valve on loop system and run pressure up with dry nitrogen.
    joe
     

Share This Page