Ontario Climatemaster Tranquility 22 - vFlow valve configuration

Discussion in 'Maintenance and Troubleshooting' started by Phobos, Sep 26, 2018.

  1. Phobos

    Phobos New Member

    Hi,

    My vFlow valve on my TZ climatemaster is not fully closing when the unit is off and the valve position is indicating 0% on the thermostat. This means I am pumping some water through my open loop 24/7. I have tried adjusting the valve configuration voltage in thermostat installer settings, but all selections seem to still result in an partially open valve. I would really appreciate any suggestions on how to further troubleshoot.

    Thanks!
     

Share This Page