Thanks. Will look into the mixing valve.
Our geothermal unit at our cottage has a desuperheater connected to a single hot water tank. I wanted to run an experiment. We were last up the...
Hi Chris: What I did was set the fan run all the time and then I changed the jumper settings so that initially jumper 1 was the lowest setting...
Okay, so I take it from this that this is not normal behaviour. I will need to poke around some more in the upper cabinet where the blower is...
Update: The board on the furnace had to be replaced (about 1.5 weeks ago) so furnace is now back up and running on Geo. Had the Technician also...
With respect to your temperature data it is very odd that you have some very noticeable spikes in LWT where the LWT greatly exceeds the EWT, which...
Sent you a PM.
Also, we are seriously considering getting a propane furnace installed up at the cottage with temporary tanks and line for the winter followed up...
It is a monitoring system that can be used for geothermal systems. I will be connecting it up at the cottage this weekend to monitor temperatures...
yes. but is there a downside if it was done in the past by previous owner/servicing company? Guy looking at the syytem suspects that for some...
Mr. XTech: There is no way at this time of year to do anything. Frost line up here is at least 5 - 6 feet deep, and bedrock is shallow...
Forgot to add that I powered off furnace to reset the fault and it made 3 attempts to run in geo and then went back into fault (low flow fault)....
I arrived to find that the geo unit was showing fault (low flow) so could not really measure anything. Pressure in the loop was 26 psi, that was...
I don't have any useful information about the loop. All I know is original installer, from memory, told us he thought the loop went out 300-400...
Update: Furnace technicians were out to the place on Thursday: Fuses were fine Geothermal was working (after they reset the fault code) Both...
Doc: I am looking at the Grundfos pump curves from their literature. Recall that my pressure drop measured in early-mid December indicated flows...
Hi. I'd like to say thanks to all who have provided me with advice and I'd also like to wish you a Happy New Year
Would my 12-13 year old waterfurnace system (I assume using 2001 technology since the manual date is January 2001) be smart enough to use a...
Mr Xtech: I believe the problem occurred coincidentally before I fuddled around with taking measurements inside the unit, which I did on the...
And as I am going to call in the furnace technician, I would like to explore the option of changing the circulation pumps from the 26-116's to...
Separate names with a comma.
