Dealer was out last week and replaced the AXB board and that fixed the issue.
Thanks for everyone’s response.
Yes, same issue several times in the past couple of days...
Thanks geoxne, for explaining what dictated which size to pick to get correct flow and heat of extraction (HE) readings.
My installer emailed me and said it should be set to 1 inch for the Waterfurnace 7 series.
Can someone explain what dictates the correct "flow meter" setting under the <setup> <sensor kit setup> menu. The picks are "none", "3/4 in",...
Can any Waterfurnace dealer be given access to my 7 series system through the Symphony system, or just the dealer who installed it?
I will check mine this weekend and report back what I find.
Yes, I am in the upstate in Landrum SC.
Yes I am suspicious of the CT for the AUX heat being installed wrong or connected to...
Has anyone run across this issue after installing the Symphony system?
Aux heat shows max wattage even though it shows off. (See attached...
Currently my system is in AC mode with AUX heat off. Symphony is showing wattage being used for AUX heat (see pic). Is this a bug?
I am looking for an wifi thermostat for a WF series 5 spit, single stage heat pump with a variable speed air handler. I am looking to replace the...
Just logged in to my series 7 "fault history" and found the 4 different faults. (See pic) What are the faults telling me about the health of...
Does anyone have any ideas how to shade a thermostat from the sun without compromising it reading the room temperature?
I have been home the past...
One page of the Symphony system does allow the homeowner to see loop temperature and entering and leaving air temperatures.
Got plenty of those also, limits that is!
Had the symphony installed several weeks ago. I have noticed that the fan wattage does not read out until about stage 6 or 7. Anyone else had this...
The setup is: I assume water will circulate through both pumps as there are NO automatic vales installed, only the red ball valves for flow...
Yes this was designed by my installer. I have not had a chance to get you the additional data today, but I will and I will post it here....
Yes most certainly.....
Here are the runtimes for the past 24 hours. Compressor 1 is the Series 7 and Compressor 2 is the Envision.
Separate names with a comma.