This is my first summer with a properly working geo and I am noticing lots of condensation on the ductwork for about the first 3 - 5 feet after...
docjenser - This may seem like a simple question, but how to you figure out the GPM with a given pump. I am pretty sure I have a grundfos 26-99...
So it has been a week and I have collected a bunch of data. My geo is cutting out due to an internal cutoff when the LWT reaches 15°F. So you...
OK, so I had some misinformation earlier. I have about 410ft of 3/4" pipe per loop with a U bend in the middle for a total of about 1640 feet of...
Sounds like the prevailing theory is I am severely short looped. How much of a problem is this to fix? Can I get some recommendations on how...
The loop temperature was measured by the installer with a temperature probe placed in a port at the entry point to the geo unit. The pipe length...
I am using a register vent in the kitchen (which is almost directly above the geo unit so it is a short run) for measuring leaving air temperature...
What should I expect for EWT temperatures? When the field has had a chance to rest (which is rare as much as it runs) it starts out in the 40°...
I have a 3100sf house in West Michigan near Grand Rapids. I had a 4 ton Bosch geo unit install this spring after the heating season had ended. I...
Loop length I have 4 U shaped runs of 200 feet each. Three are in relative proximity and parallel to each other (separated by 10 - 15 feet)...
It is installed The loop digger did a horizontal bore and the system is now in place. I ended up with the Bosch unit and we will see how well it...
I have two quotes that are more or less identical in price. One is offering a Bosch TA049 and the other a Climatemaster TT049. Any thoughts...
Separate names with a comma.
