That sounds crazy high. May be better off going with your builders stock HVAC system and having a dedicated geothermal installer come out...
No real concern. Strength of heat welds are comparable to the base pipe itself. Vibration in and of itself won’t break plastic. Significant...
At that distance, Absolutely no concern. I’m a licensed mechanical engineer with an advanced degree in civil engineering.
No worry. Drive the grinder anywhere you want over the field. PE pipe can take significant pressure inside or out. Road construction...
I don't expect it could have a significant impact on a properly designed field. On a marginal design, it could add a bit of benefit. Dense...
As we get into spring, I note how dramatically my grass is reemerging only in areas that had solid leaf cover. That slight bit of insulation is...
I've had my system 8 years. When we had polar vortex year, I was pushing 26-29 degrees for a couple weeks straight, but it kept going. I have...
I’d suggest you have this manual pulled up as a reference unless he is a dedicated geothermal guy.
One addendum to Docs comment. It may be neither. It seems that often times aux kicking in is due to thermostat settings. If people get too...
https://files.climatemaster.com/ClimateMaster_Basic_Troubleshooting_Information_and_Guidelines.pdf I think slow flash is "fault retry" mode. In...
My unit was on 4"x4" rubber vibration pads at each corner. It was still noisy. I sprayed a bunch of spray foam under the center of the unit to...
It seems PVC pipe at whatever length could be placed in ICF prior to pour. Place a pipe cap on both sides, inside and out until needed. Once you...
I'd consider ensuring provisions to isolate the geothermal from softerner to ensure you will have future opportunity to circulate acid through geo...
I have two units, one in my in-law apartment. Mom was insistent that night time temperature be cooler. My solution was to set back to 66 at 7 or...
Without knowing how accessible your system is and how easy it would be to modify, you may want to consider adding an air purge/bleed valve. I...
Separate names with a comma.
