Sounds like your system is fine, a FYI would be a simple loose connection on the primary power relay or a relay with a burned contact, can give...
"You needn't take offense", MY OPTION K.M.A.! "You took it upon yourself to dispute the opinion of multiple pros with what is likely very poor...
I built my home 25 years ago, the heating system was designed by a large reputable local shop, I paid for the design and did the work myself. I...
I do not think it is as simple an answer as you might think! Lots of facts missing, Short answer is when unit not running , bill not getting...
Thank God for third world countries!
Simple, install a time delay relay , use the normally closed contact to show water flow when system is off (fake signal) this will allow system to...
loops are 1" x 300' deep, So are you using a 1/2 inch drill rod for your 1 inch holes? Well I am thinking I do not know the difference, I was...
ScottO, if you are trying to heat a uninsulated slab as Engineer suggest, you may want to take the silent advise the original owner gave you after...
loops are 1" x 300' deep, So are you using a 1/2 inch drill rod for your 1 inch holes?
One measurement is worth ten expert opinions!
OK lets see if what I did makes sense to you or anyone else, I have a set of sill cocks (hose bibs) on each unit one on entering water and one on...
If well is not too deep (150 ft or less is good) and you can get very high flow from well, using the well would be very cost effective, BUT you...
Anything else to say hardhines? Now I understand this question, best of luck, I use flow gauges but do not have a interlock setup, but its would...
You have but to ask the question, as "EVERYONE IS ENTITLED TO MY OPINION" ! (I HAVE THE TEE SHIRT TO PROVE IT).
Separate names with a comma.
