My system is a Water FurnaceEnvision 049 four ton water to air heat pump using a open loop from my well and then dumping back into it. The well is...
One important difference in my storage tank from other tanks is that mine has only two possible connections. It has a drain at the bottom and a...
Any harm in connecting the storage tank "out" to the DSH "in" instead of to the DSH "out"? My system is water to air Geo Water Furnace Envision...
Joe, Yes , I have an Amtrol tank as you guessed. If I understand you then your suggestion is to tee the cold water and hot water pipes . The tee...
The drain on my storage tank is teed to the cold waterinlet. I don't have a cold water in at the top of the tank so it looks like I can't use...
Curt, I have a storage tank that is connected to my oil boiler but the thermostat is shut off. I do not heat hot water from the boiler any more. i...
How should I connect the storage tank from my oil boiler to the SDH ? My storage tank has a "hot water out" connection at the top, a drain...
My system requires 1.5 to 2 GPM per ton. Will more GPM mean more or less efficiency this winter? I can adjust the flow up to 16 GPM but is this...
Urthbuoy and palacegeo, thanks for the input. I can watch the loop temp by watching the LWT and I can make sure the oil comes on if the Geo is...
The geo system has one zone but we have it balanced so it is evenly distributed. The oil furnace is a hot water baseboard system on zones. The oil...
My system is open loop using my well. WF Envision 049 4 ton water to air unit. I chose to not have an aux heat installed since I have a working...
Separate names with a comma.
