Shame on Waterfurnace! We have a client with a GeoComfort unit Mfg. by Waterfurnace, the compressor shorted out and we had a new compressor drop...
The only parts that MIGHT be interchangeable would be the electronics and possibly the blower assm.
How long does the unit run before the stat is satisfied? Is the unit running in first stage or second stage?
You might want your contractor to check the Hydron Evolution series. A YT048 at 30* EWT and 12 GPM puts out 40,500 Btu's at 3.89 COP. This unit...
110* without plates and bubble foil, I doubt it. With plates and good insulation, maybe...
No harm is done. However, Most Geo systems are designed to include some Aux Heat. How much is a question for your contractor. Bergy
What flooring is above the staple-up? Bubble foil is, for all practical purposes, worthless. Remember one thing... Heat goes to cold. if it's...
In the heating mode, Entering Water Temp (EWT) is higher than Leaving Water Temp (LWT) because you are extracting heat from the water. Generally...
With an open loop water should flow as soon as the Taco valve opens.
Our design paperwork is never left with the client until we have a signed contract. We do, however, sit down with them and go through everything...
Sounds like the loops got dirt/clay/bentonite in them during install. We had a loop like that once. Very, very fine grit sediment. It took several...
He should do his own manual J to GET the job...
Don't forget to order the rubber guard for the gauge.
Separate names with a comma.
