Standing Column Well Geothermal Systems: Philadelphia, PA (8:00 AM)

Learn about standing column wells from the industry's expert. This geothermal design course will address the fundamentals of what makes the Standing Column Well (SCW) different and compelling as a geothermal HVAC solution. It will investigate a number of SCW design applications, and review the key thermal and hydro-geological bases for good performance.

• Walk through of well-sizing and performance
• Review of leading industry data on SCW systems
• Group activity with the guidance of the instructor and a workbook to perform calculations to design a system, determine its payback and costs
• Walking tour of a recent 200 ton SCW project at the nearby Friends Center
• Analysis of actual data from thermal testing with interpretation
• Hands-on session with a model simulator to predict SCW system performance
• Learning what a standing column well is, how it works, and how it compares to other geothermal system
• Designing your own standing column wells
• Finding out how to predict installation costs and actual performance of a standing column well design

Contact Info : HeatSpring Learning Institute Telephone: 800.393.2044 Location: Friends Center 1501 Cherry Street Philadelphia, PA 19102 Email : info@heatspring.com Url: http://www.heatspring.com/

TETCO® Design/Application Training: Fort Wayne, IN (8:00 AM)

A one-day seminar covering all aspects of design, selection, and application of residential geothermal systems.  Topics include geothermal technology, introduction/application of TETCO products, ground loop options, sizing the heat pump/ground loop, preparing a list of components, and thorough instruction on how to use the GeoAnalyst® software program.  The training is intended for designers, sales personnel, and anyone who wants a better understanding of the technology. 
Cost is $99 per person.

Contact Info : If you have any questions, please feel free to e-mail us at avories@enertechmfg.com Email : avories@enertechmfg.com Url: http://www.enertechmfg.com/training1

TETCO® Installation/Service Training: Fort Wayne, IN (8:00 AM)

This two-day seminar is geared towards installation and service technicians who already have a basic understanding of HVAC systems and refrigeration.  Topics include packaged unit installation, split systems, water-to-water units, combination units, controls operation and troubleshooting, flow center installation and flushing, equipment start-up, performance checks, servicing the system, and refrigeration system/troubleshooting.  Cost is $295 per person, and includes geothermal service tools, training materials, and 16 NATE continuing education hours.

Contact Info : If you have any questions, please feel free to e-mail us at avories@enertechmfg.com Email : avories@enertechmfg.com Url: http://www.enertechmfg.com/training1

TETCO® Installation/Service Training: Fort Wayne, IN (8:00 AM)

This two-day seminar is geared towards installation and service technicians who already have a basic understanding of HVAC systems and refrigeration.  Topics include packaged unit installation, split systems, water-to-water units, combination units, controls operation and troubleshooting, flow center installation and flushing, equipment start-up, performance checks, servicing the system, and refrigeration system/troubleshooting.  Cost is $295 per person, and includes geothermal service tools, training materials, and 16 NATE continuing education hours.

Contact Info : If you have any questions, please feel free to e-mail us at avories@enertechmfg.com Email : avories@enertechmfg.com Url: http://www.enertechmfg.com/training1

Geothermal With Confidence: NH (8:00 AM)

2-Day Water to Water & Water To Air Geothermal Heat Pump Installation

The fee for this two (2) day class is $800.00 per person and this includes:

Continental Breakfast both days
Lunch both days
All of your Classroom Supplies and Learning Materials
$50.00 off of your first Water Energy Distributors, Inc. equipment purchase
Eligible for a GOLD DEALER Discount.

**All Payments must be made in advance by Credit Card or Check to reserve your spot. All payments are Non-Refundable.

Contact This e-mail address is being protected from spambots. You need JavaScript enabled to view it or 603-329-8122 X12 for more details.

Outline:

* Installation Overview
* Earth Coupling Options
* Water to Air Installation, Operation, and Maintenance
* Hands-On Training
* Ducts
* Open and Standing Column Wells
* Closed Loops
* Benefits and Environmental
* Water to Water Installation, Operation, and Maintenance
* DeSuper-Heaters and Electrical
* Generating Requirements for Geo Heat Pumps
* Fan Coils
* Radiant Floor Systems
* Live Equipment

Contact Info : Contact Shauna@northeastgeo.com or 603-329-8122 X12 for more details. Email : Shauna@northeastgeo.com Url: http://www.northeastgeo.com/pdf/Registration.pdf

Geothermal With Confidence: NH (8:00 AM)

2-Day Water to Water & Water To Air Geothermal Heat Pump Installation

The fee for this two (2) day class is $800.00 per person and this includes:

Continental Breakfast both days
Lunch both days
All of your Classroom Supplies and Learning Materials
$50.00 off of your first Water Energy Distributors, Inc. equipment purchase
Eligible for a GOLD DEALER Discount.

**All Payments must be made in advance by Credit Card or Check to reserve your spot. All payments are Non-Refundable.

Contact This e-mail address is being protected from spambots. You need JavaScript enabled to view it or 603-329-8122 X12 for more details.

Outline:

* Installation Overview
* Earth Coupling Options
* Water to Air Installation, Operation, and Maintenance
* Hands-On Training
* Ducts
* Open and Standing Column Wells
* Closed Loops
* Benefits and Environmental
* Water to Water Installation, Operation, and Maintenance
* DeSuper-Heaters and Electrical
* Generating Requirements for Geo Heat Pumps
* Fan Coils
* Radiant Floor Systems
* Live Equipment

Contact Info : Contact Shauna@northeastgeo.com or 603-329-8122 X12 for more details. Email : Shauna@northeastgeo.com Url: http://www.northeastgeo.com/pdf/Registration.pdf

Acredited Drillers Training: West Chester, PA (8:00 AM)
Applications of Production Drilling and Borehole Construction for GeoExchange Systems course. This new workshop will train individuals on proper construction and completion methods for vertical GeoExchange boreholes. Currently, drilling contractors searching for industry training on GeoExchange heat pumps must attend a full Accredited Installer workshop. Because certain topics covered within the Accredited Installer course do not pertain to drilling contractors, IGSHPA has formed this training course to provide drilling contractors with information that’s unique to them on a GeoExchange job site.

Who should attend?

Current Drilling Contractors, Drilling Company Owners, Drilling Company Project Managers, Drilling Company Administrators

Accreditation:

Accreditation as an “Accredited Vertical Loop Installer” will be awarded with successful completion of the course and exam. You will receive a vertical loop installer's card and a certificate. In most instances, you will receive a membership with IGSHPA after you have completed the training class. Membership in IGSHPA is required to be an Accredited Vertical Loop Installer and maintain accreditation.

top

Topics:

• GSHP System Design and Layout Basics,
• System Materials
• Pressure Drop Calculations
• Thermal Conductivity
• Drilling Processes
• Containment Procedures
• Grouting Concepts
• Air and Debris Purging
• Pipe Joining Techniques
• Project Bidding
• Partnerships

Contact Info : Todd Giddings Telephone: 814-238-5927 Email : toddgiddings@verizon.net Url: http://www.toddgiddings.com

Acredited Drillers Training: West Chester, PA (8:00 AM)
Applications of Production Drilling and Borehole Construction for GeoExchange Systems course. This new workshop will train individuals on proper construction and completion methods for vertical GeoExchange boreholes. Currently, drilling contractors searching for industry training on GeoExchange heat pumps must attend a full Accredited Installer workshop. Because certain topics covered within the Accredited Installer course do not pertain to drilling contractors, IGSHPA has formed this training course to provide drilling contractors with information that’s unique to them on a GeoExchange job site.

Who should attend?

Current Drilling Contractors, Drilling Company Owners, Drilling Company Project Managers, Drilling Company Administrators

Accreditation:

Accreditation as an “Accredited Vertical Loop Installer” will be awarded with successful completion of the course and exam. You will receive a vertical loop installer's card and a certificate. In most instances, you will receive a membership with IGSHPA after you have completed the training class. Membership in IGSHPA is required to be an Accredited Vertical Loop Installer and maintain accreditation.

top

Topics:

• GSHP System Design and Layout Basics,
• System Materials
• Pressure Drop Calculations
• Thermal Conductivity
• Drilling Processes
• Containment Procedures
• Grouting Concepts
• Air and Debris Purging
• Pipe Joining Techniques
• Project Bidding
• Partnerships

Contact Info : Todd Giddings Telephone: 814-238-5927 Email : toddgiddings@verizon.net Url: http://www.toddgiddings.com

Accredited Geothermal Installer Course: Baltimore, MD (7:45 AM)

Offered in partnership with the International Ground Source Heat Pump Association (IGSHPA), this course is a three-day comprehensive course focused on the installation of geothermal heating and cooling systems.  The course includes an open-book exam to become an accredited geothermal installer.

The course combines classroom learning with hands-on experience and is taught by a certified instructor with extensive geothermal experience. A step-by-step example of a local closed loop system design for residential applications is covered as well as geothermal marketing and sales for small and large companies.

Accreditation: Upon successful completion of the workshop and passing the International Ground Source Heat Pump Association open book exam, you will be issued an IGSHPA accreditation as an installer of GSHP systems. You will receive an installer's card and a certificate and you will be listed as an accredited geothermal installer.

Contact Info : HeatSpring Learning Institute Telephone: 800.393.2044 Location: TBD Email : info@heatspring.com Url: http://www.heatspring.com/

GeoComfort® Design/Application Training: Greenville, IL (8:00 AM)

A one-day seminar covering all aspects of design, selection, and application of residential geothermal systems.  Topics include geothermal technology, introduction/application of GeoComfort products, ground loop options, sizing the heat pump/ground loop, preparing a list of components, and thorough instruction on how to use the GeoAnalyst® software program.  The training is intended for designers, sales personnel, and anyone who wants a better understanding of the technology. 
Cost is $99 per person.

Contact Info : If you have any questions, please feel free to e-mail us at avories@enertechmfg.com Email : avories@enertechmfg.com Url: http://www.enertechmfg.com/training1

GeoComfort® Design/Application Training: Ottawa, ON (8:00 AM)

A one-day seminar covering all aspects of design, selection, and application of residential geothermal systems.  Topics include geothermal technology, introduction/application of GeoComfort products, ground loop options, sizing the heat pump/ground loop, preparing a list of components, and thorough instruction on how to use the GeoAnalyst® software program.  The training is intended for designers, sales personnel, and anyone who wants a better understanding of the technology. 
Cost is $99 per person.

Contact Info : If you have any questions, please feel free to e-mail us at avories@enertechmfg.com Email : avories@enertechmfg.com Url: http://www.enertechmfg.com/training1

Acredited Drillers Training: West Chester, PA (8:00 AM)
Applications of Production Drilling and Borehole Construction for GeoExchange Systems course. This new workshop will train individuals on proper construction and completion methods for vertical GeoExchange boreholes. Currently, drilling contractors searching for industry training on GeoExchange heat pumps must attend a full Accredited Installer workshop. Because certain topics covered within the Accredited Installer course do not pertain to drilling contractors, IGSHPA has formed this training course to provide drilling contractors with information that’s unique to them on a GeoExchange job site.

Who should attend?

Current Drilling Contractors, Drilling Company Owners, Drilling Company Project Managers, Drilling Company Administrators

Accreditation:

Accreditation as an “Accredited Vertical Loop Installer” will be awarded with successful completion of the course and exam. You will receive a vertical loop installer's card and a certificate. In most instances, you will receive a membership with IGSHPA after you have completed the training class. Membership in IGSHPA is required to be an Accredited Vertical Loop Installer and maintain accreditation.

top

Topics:

• GSHP System Design and Layout Basics,
• System Materials
• Pressure Drop Calculations
• Thermal Conductivity
• Drilling Processes
• Containment Procedures
• Grouting Concepts
• Air and Debris Purging
• Pipe Joining Techniques
• Project Bidding
• Partnerships

Contact Info : Todd Giddings Telephone: 814-238-5927 Email : toddgiddings@verizon.net Url: http://www.toddgiddings.com

Accredited Geothermal Installer Course: Baltimore, MD (7:45 AM)

Offered in partnership with the International Ground Source Heat Pump Association (IGSHPA), this course is a three-day comprehensive course focused on the installation of geothermal heating and cooling systems.  The course includes an open-book exam to become an accredited geothermal installer.

The course combines classroom learning with hands-on experience and is taught by a certified instructor with extensive geothermal experience. A step-by-step example of a local closed loop system design for residential applications is covered as well as geothermal marketing and sales for small and large companies.

Accreditation: Upon successful completion of the workshop and passing the International Ground Source Heat Pump Association open book exam, you will be issued an IGSHPA accreditation as an installer of GSHP systems. You will receive an installer's card and a certificate and you will be listed as an accredited geothermal installer.

Contact Info : HeatSpring Learning Institute Telephone: 800.393.2044 Location: TBD Email : info@heatspring.com Url: http://www.heatspring.com/

GeoComfort® Installation/Service Training: Greenville, IL (8:00 AM)

This two-day seminar is geared towards installation and service technicians who already have a basic understanding of HVAC systems and refrigeration.  Topics include packaged unit installation, split systems, water-to-water units, combination units, controls operation and troubleshooting, flow center installation and flushing, equipment start-up, performance checks, servicing the system, and refrigeration system/troubleshooting.  Cost is $295 per person, and includes geothermal service tools, training materials, and 16 NATE continuing education hours.

Contact Info : If you have any questions, please feel free to e-mail us at avories@enertechmfg.com Email : avories@enertechmfg.com Url: http://www.enertechmfg.com/training1

GeoComfort® Installation/Service Training: Ottawa, ON (8:00 AM)

This two-day seminar is geared towards installation and service technicians who already have a basic understanding of HVAC systems and refrigeration.  Topics include packaged unit installation, split systems, water-to-water units, combination units, controls operation and troubleshooting, flow center installation and flushing, equipment start-up, performance checks, servicing the system, and refrigeration system/troubleshooting.  Cost is $295 per person, and includes geothermal service tools, training materials, and 16 NATE continuing education hours.

Contact Info : If you have any questions, please feel free to e-mail us at avories@enertechmfg.com Email : avories@enertechmfg.com Url: http://www.enertechmfg.com/training1

Accredited Geothermal Installer Course: Baltimore, MD (7:45 AM)

Offered in partnership with the International Ground Source Heat Pump Association (IGSHPA), this course is a three-day comprehensive course focused on the installation of geothermal heating and cooling systems.  The course includes an open-book exam to become an accredited geothermal installer.

The course combines classroom learning with hands-on experience and is taught by a certified instructor with extensive geothermal experience. A step-by-step example of a local closed loop system design for residential applications is covered as well as geothermal marketing and sales for small and large companies.

Accreditation: Upon successful completion of the workshop and passing the International Ground Source Heat Pump Association open book exam, you will be issued an IGSHPA accreditation as an installer of GSHP systems. You will receive an installer's card and a certificate and you will be listed as an accredited geothermal installer.

Contact Info : HeatSpring Learning Institute Telephone: 800.393.2044 Location: TBD Email : info@heatspring.com Url: http://www.heatspring.com/

GeoComfort® Installation/Service Training: Greenville, IL (8:00 AM)

This two-day seminar is geared towards installation and service technicians who already have a basic understanding of HVAC systems and refrigeration.  Topics include packaged unit installation, split systems, water-to-water units, combination units, controls operation and troubleshooting, flow center installation and flushing, equipment start-up, performance checks, servicing the system, and refrigeration system/troubleshooting.  Cost is $295 per person, and includes geothermal service tools, training materials, and 16 NATE continuing education hours.

Contact Info : If you have any questions, please feel free to e-mail us at avories@enertechmfg.com Email : avories@enertechmfg.com Url: http://www.enertechmfg.com/training1

GeoComfort® Installation/Service Training: Ottawa, ON (8:00 AM)

This two-day seminar is geared towards installation and service technicians who already have a basic understanding of HVAC systems and refrigeration.  Topics include packaged unit installation, split systems, water-to-water units, combination units, controls operation and troubleshooting, flow center installation and flushing, equipment start-up, performance checks, servicing the system, and refrigeration system/troubleshooting.  Cost is $295 per person, and includes geothermal service tools, training materials, and 16 NATE continuing education hours.

Contact Info : If you have any questions, please feel free to e-mail us at avories@enertechmfg.com Email : avories@enertechmfg.com Url: http://www.enertechmfg.com/training1

Ground Source Heating & Cooling For Residential And Commercial Properties: Cincinnati, OH (All Day)


Contact Info : American Ground Water Trust Telephone: 603.228.5444 Location: TBD Url: http://www.agwt.org/workshops.htm

HomeOwners Workshop: NH (8:00 AM - 12:00 PM)

This workshop is open to anyone who is interested in learning about the benefits of ClimateMaster Geothermal Heat Pumps. Our experienced and professional staff, which includes 3 certified Geo Designers will be on hand to answer any questions or concerns you may have concerning Geothermal Heat Pumps and their many applications. Also on hand that day will be several of our highly qualified installers and well drillers to guide you through the installation process.

This is a FREE workshop. Workshop begins at 8:00 a.m. and ends at 12:00 p.m.

Coffee and doughnuts will be served and the dress is casual.

The day promises to be informative and educational.

The Water Energy Crew Looks Forward To Meeting You!

Contact Info : WORKSHOPS ARE HELD AT WATER ENERGY DISTRIBUTORS… “GEO BARN!” * 2 Starwood Drive Hampstead, NH 03841 Call 603/329-8122 to RSVP Email : Monique@northeastgeo.com Url: http://www.northeastgeo.com/pdf/homeReg.pdf